Yacht Harbours in Mecklenburg-Vorpommern
Yacht harbours along the Baltic coast of Mecklenburg-Vorpommern vary in location, harbour basin, berth size and season. Kühlungsborn, Hohe Düne in Warnemünde and Glowe on Rügen illustrate the details that matter when choosing a suitable stop and berth.
Marina Kühlungsborn (Foto: Touristik-Service Kühlungsborn GmbH)
Yacht harbours in Mecklenburg-Vorpommern: key facts
- The examples range from a boat harbour on the open coast to the marina in Warnemünde and Glowe harbour on Rügen.
- Kühlungsborn Boat Harbour has around 400 berths for permanent and visiting boats; visiting yachts can book a berth through the booking portal.
- Hohe Düne Marina offers 920 berths. Its berths accommodate boats from 9 to 23 metres long; vessels up to 60 metres can moor at the south mole.
- Glowe Harbour has 190 berths, including 120 for visiting boats. Following dredging in autumn 2025, the stated depth is 2.50 metres above sea level (NN).
- When choosing a berth, consider the boat’s length, beam and draft, as well as the approach, seasonal rules and preferred location on the Baltic Sea, Bodden lagoon or island coast.
Three harbour profiles for different sailing itineraries
When planning a leg, consider the harbour’s position on the route, the approach and the available depth; on board, berth size and the necessary facilities also matter. The Baltic Sea overview of yacht harbours features further examples. The following harbours illustrate specific differences within Mecklenburg-Vorpommern.
Kühlungsborn: boat harbour with around 400 berths
Kühlungsborn Boat Harbour lies on the Bay of Mecklenburg and was completed in 2005. It is owned by the town and operated by Touristik-Service Kühlungsborn. Around 400 berths are available for permanent and daily visitors. Visiting yachts can book in advance through DOCK24, according to the operator. The facilities are primarily used for tourism during the season from April to the end of October, although the harbour is open all year round.
Berth dimensions vary by facility: boats up to 24 metres can moor at the pontoons, up to 18 metres at the floating pontoons, and vessels up to 35 metres are accommodated along the quay wall. The harbour basin is between three and three and a half metres deep, depending on the area. Strong offshore winds can cause the water level to drop considerably. Boat dimensions and current harbour conditions should therefore both be taken into account when planning an arrival.
The harbour’s facilities include five pontoons with floating berths, power and water pedestals, a mast and boat crane, a boat wash area and a fuel station. The operator also lists disposal facilities for boat waste and wastewater tanks, as well as charter and excursion partners. A stay ashore combines the marina with the seaside resort: the Kühlungsborn town guide describes the pier, town forest and Molli railway. Find a suitable base for an overnight stay among the accommodation options in Kühlungsborn.
Hohe Düne in Warnemünde: large berths and a deep fairway
Hohe Düne Marina has 920 berths across eleven concrete floating pontoons with wooden decking. Its berths are designed for boats from 9 to 23 metres long and 3.20 to 6.70 metres wide; the minimum water depth is four metres. Vessels up to 60 metres long can moor at the south mole. The harbour states that the fairway is at least 4.5 metres deep. These details set Hohe Düne apart from smaller harbours with different berth-size limits.
Visiting yachts can rent a berth by the day or for a month. The harbour’s summer season runs from 1 April to 31 October. The wide choice of berths is particularly relevant when planning a route if the boat’s dimensions and draft call for a larger berth or greater water depth. The harbour’s details, together with the vessel’s length, beam and draft, determine which berth is suitable.
Hohe Düne lies opposite the centre of Warnemünde, at the harbour entrance. A stay ashore can therefore combine views of the harbour with the beach, promenade and Alter Strom. The accommodation options in Warnemünde provide an overview of places to stay in the seaside resort; accommodation can be chosen to suit the planned harbour access and activities ashore.
Glowe on Rügen: visitor berths on the north coast
Glowe Harbour has 190 berths, 120 of which are designated for visiting boats along the first two pontoons. Berths on the northern pontoon are 16 metres long and 4.60 metres wide. The stated dimensions on the other pontoons range from 10 by 2.80 metres to 14 by 4.50 metres. Two berths measuring 16 by 9 metres are intended for catamarans. Following dredging in autumn 2025, the harbour states a depth of 2.50 metres above sea level (NN).
According to the harbour, all berths have power and water connections; a flat fee per night applies for the electricity pedestals. Other facilities include toilets and showers, a wastewater disposal station, slipway, harbour fuel station and waste-disposal facilities. Use of the washing machine, dryer, showers, parking, fuel and slipway is subject to separate arrangements.
As a stop on a sailing itinerary, Glowe combines a stay on Rügen with a compact harbour and a clearly stated number of visitor berths. For onward planning on the island, the Rügen overview covers its varied coastal and town locations. If you would rather stop in a historic harbour town on the mainland, you can include the Hanseatic city of Stralsund in your trip.
Plan your berth and arrival to suit your boat
The vessel’s dimensions are the first point of comparison when making a specific enquiry. Length and beam determine which berth or pontoon will fit the boat; its draft must be suitable for the stated depth of the harbour basin and approach. Kühlungsborn lists different limits for its pontoons, floating pontoons and quay wall. Hohe Düne provides berth dimensions and minimum depths, while Glowe specifies different dimensions for each pontoon. You can compare these figures directly with your boat’s specifications.
Arrival planning also involves the intended dates and local booking arrangements. Kühlungsborn offers advance booking for visiting yachts; Hohe Düne lists daily and monthly rental periods. Glowe offers online booking after arrival. If you have a specific arrival time in mind, include the booking method, season and length of stay in your itinerary planning.
You can also match the facilities to your sailing plans. For a short overnight stay, power and water connections, sanitary facilities and access to the town may be important. On longer trips, waste disposal, repair and lifting facilities, fuel and charter services may be more relevant. The operators’ information for Kühlungsborn and Glowe lists these services in detail, while Hohe Düne describes berth dimensions and depths.
The harbour’s location also shapes your activities ashore and the next leg of your route. Kühlungsborn is a seaside resort on the Bay of Mecklenburg, Hohe Düne is in Warnemünde, and Glowe is on Rügen’s north coast. The next step in your trip could include an overnight stay in town, a visit to the coast or another harbour stop. The page Water sports on Mecklenburg’s Baltic coast adds further sailing areas and activities on the water to the harbour comparison.
The dimensions point to different uses: in Kühlungsborn, the stated limits are 18, 24 or 35 metres, depending on the facility; the basin is three to three and a half metres deep. Hohe Düne offers berths for boats from 9 to 23 metres long, with at least four metres of water depth and 4.5 metres in the fairway. In addition to smaller berths, Glowe has two catamaran berths measuring 16 by 9 metres. This makes it possible to narrow down your options first by boat type and draft.
Frequently asked questions about yacht harbours in Mecklenburg-Vorpommern
Which harbour has the most berths in these three examples?
Hohe Düne Marina in Warnemünde lists 920 berths. Kühlungsborn Boat Harbour has around 400, and Glowe Harbour has 190, including 120 designated visitor berths. These figures describe the respective facilities; finding a suitable berth also depends on your boat’s dimensions and the dates of your stay.
What details about my boat should I have ready when enquiring about a berth?
The key details are the vessel’s length, beam and draft. Compare these dimensions with the harbour’s information about its berths, pontoons, basin and approach. Available widths, lengths and water depths vary considerably between harbours.
Can I book a visitor berth in advance?
Booking arrangements vary: visiting yachts can book in advance through DOCK24 in Kühlungsborn. Hohe Düne offers daily or monthly rental periods. Glowe offers online booking after arrival. Follow the information provided by your chosen harbour when planning your trip.